To turn on the projector: Point the remote control toward the projector and press the ON button. Hold the button down for approximately one second, then release. You should hear the fan start. The projector takes a few minutes to reach maximum brightness.

While the projector is warming up, turn on the power to the computer or VCR. If you are using the computer, remember: At the Novell sign-in, follow Academic Computing Department’s instructions and enter your New Paltz computer User ID and password. Be sure to log out when you are finished.

Select your input for the projection on the remote control:
Press Input 1 for computer projection
Press Input 3 for VCR projection

There is an Extron switcher box located under the instructor’s station. It must be set to #1 for computer projection. To project your Laptop, connect a computer cable from your laptop to the back of the Extron box, input 2. Press button #2 on the front of the Extron box.

Lower the electric screen with the 3-position toggle control on the wall.

To turn the equipment off: Point the remote control at the LCD projector. Press the OFF button twice. The bulb will go off but the fan will continue to run. It will turn itself off when the bulb has cooled.

Turn off the computer or the VCR.

Never touch the ceiling mounted LCD projector. It is alarmed!

IMS is eager to assist you in case of difficulties. We respond in person and immediately to calls for help whenever possible. Training and assistance is also available. Call Instructional Media Services at x3630 days or x3639 evenings.

For computer problems, call Academic Computing at x3816.